Skip to content

Octave 8 ft. x 12 ft. Greenhouse

Size

Preview in 3D

Preview in AR

Scan QR code for AR preview on your device
Requires compatible Apple iOS 13 or Android with ARCore 1.9+
Structure color
Glazing

The Octave is the spacious greenhouse for the gardening enthusiast. The large work-space and wide double door provide the enthusiastic gardener plenty of growing room with enough to spare for seeding and storing tools and supplies. The rust-resistant, reinforced aluminium frame and crystal-clear, virtually unbreakable polycarbonate panels make this greenhouse maintenance-free and highly durable, capable of withstanding harsh weather conditions for many years of gardening use.

  • Virtually unbreakable, crystal-clear polycarbonate panels provide over 90% light
    transmission
  • Panels block harmful UV rays and are 100% UV protected; do not discolour, fracture or
    shatter
  • Sturdy, reinforced, rust-resistant aluminium frame with support beams for added risilience
  • Galvanised steel base included with designated holes for anchoring (anchors not supplied)
    for additional structural stability
  • 2 manually adjustable vent windows for improved ventilation
  • Easy DIY installation – sliding panels’ assembly system, ready to assemble pre-drilled
    profiles, and pre-cut panels
  • Low-threshold, high & wide double door for easy access
  • High headroom (2.25m) for improved working space
  • Lockable door handle (padlock not included)
  • Built-in gutter system for effective water drainage & collection
  • Maintenance free design

Dimensions

A Length 365cm 11'12"ft
B Width 244cm 8'ft
C Height 299cm 7'6"ft
D Door Width 114.5cm 3'9"ft
E Door Height 194.5cm 6'5"ft

Product Details

Greenhouse Accessories

Check out our certified Canopia accessories  

Extra support beams

For added strength

Easy access

Sliding assembly system Uniform profiles for all positions

Rating and Reviews

0.00 (0 Reviews)
Rating Breakdown
0
0
0
0
0
Post a review
Customer Reviews (0)

There are no reviews yet.

FAQ

No, it is not an option, it cannot be performed.
Yes, it can be disassembled, relocated and reassembled at a different location.
No, it is not an option to get doors on both ends.
It is not possible to install the Lean To Grow House’ door at the other side. It is possible to install only as shown in the instructions.
The greenhouses do not come with a floor or base.
Yes, the polycarbonate panels are high impact resistant and withstand hail.
The warranty for all our greenhouses is for at least 5 years, some for more. The crystal-clear single layer or twin-wall polycarbonate panels maintain their integrity, they do not discolor, opacify, fracture or shatter over time.
Each wall section can carry up to 44 lbs. at most – an entire wall would depend upon the greenhouse’ size.
It can be anchored to a foundation, depending on the greenhouse, some have compatible holes at the bottom of the greenhouse base, and some have their own integrated anchoring. Yes, the greenhouse can be anchored to concrete slab. It can be anchored directly to the ground using ground stakes (ground stakes are not supplied with the greenhouse kits). *Firmly connect the product to a level surface immediately after completion of the assembly. Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
The Palram Greenhouse can be used year-round, there are several factors to consider. The two main factors are weather and plants. What are the plants you want to grow and how much heat or cold can they handle? No matter where you live, greenhouses can be 20-40 degrees hotter inside during the day and at night they will be the same temperature as the outdoors. This is without any supplemental heating or cooling. Depending on where you live, heating and / or cooling your greenhouse can make the difference. If you need to heat or cool your greenhouse in extreme weather conditions, you may want to consider a twin-wall greenhouse such as the Palram Glory Greenhouse which has a 10mm polycarbonate covering.

Assembly guide

Assembly instructions & Certificates for Downloads

OCTAVE ™ 8×12 / 2.4×3.7
Essence-Balance-Octave Certificate EN1090

Foundation

A
Prepare the site

The product must be built on a solid anleveled surface in order to perform properly.

1 - Clear the site
 
 
2 - Level the ground
 
 
Important We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.
B
Choose your foundation type

For a foundation, we recommend using three material types: Concrete / Pressure-treated wood/ wood deck / Paver blocks.

Option 1: Solid base
 
Preferred
Option 2: Solid frame
 
Preferred
Option 3: Firm ground / grass
 
Possible
 

* The size of the greenhouse displayed is for illustration purposes only and may not reflect the size of your greenhouse.

Not possible
C
Anchor to foundation
On a solid foundation / frame
 
 

Secure the product to the foundation of your choice using suitable screws & plugs or masonry anchors (not supplied).

Make sure you have at least 5 cm / 2″ between the product base and the edges of your foundation – on all sides.

On soil / grass
 
 

Secure the product to the ground surface using suitable long pegs (not supplied). Please consult with an expert regarding which fasteners are suitable for other surface types.

Customers who viewed this also viewed

Need help making a purchase decision?
Fill out the form below and we will help!

    Open chat
    1
    Need help?
    Hello 👋
    Can we help you?